Australian PPE supplies are extremely low so we're helping to produce Personal Protective Equipment for those superheroes working on the front lines in hospitals.
We figure there are other concerned workers in jobs such as in aged care homes, chemists, medical practices and supermarkets as well as those who are vulnerable, so we are making these available to all Australians. Due to new export rules for 'Essential Medical Supplies', these are only available within Australia.
Our 3D Printed Comfy Face Shields use a soft closed cell foam together with a very soft and absorbent open cell foam next to the skin for all-day comfort with no bruising.
The wide 20mm elastic gives great support without needing a tight fit to stay in place.
Side clasp for elastic can be adjusted easily without help and also while wearing scrubs and gloves.
Can be worn with or without a face mask.
Larger volume is less claustrophobic and less likely to fog-up at critical moments.
Available in 2 sizes: Medium to Large: Above 56cm circumference
Small to Medium: Up to 56cm circumference
For re-use, you can disinfect after use with either soapy water or a 70-85% Ethanol or Iso Propyl Alcohol solution. Keep wet for at least 20 seconds before rinsing and drying. Store dry in its bag when not in use.
Note: Cleaning will eventually break down the foam adhesive and reduce its lifespan. Do not autoclave. Leaving in a car on a hot day will likely deform the frame.